2108 100t Lifting beam design

Saetech was contracted by M.J. van Riel to design & calculate a 100t capacity lifting beam. The spreader beam/ lifting beam is designed with multiple lifting points, and is designed using RFEM FE software.

The beam has a length of 13 meters, with a lifting capacity of 100 tonnes. It has multiple holes on the bottom side to be able to lift various loads.

The beam was completely designed, calculated, and prepared fabrication-ready by Saetech.

With the beam a specific calculation sheet was delivered. Using that sheet, the client is able to check & confirm the capacity of the spreader for each individual project.

Translate »